CrossCheck Insecticide: How to Choose and Use It Correctly

2.4 to 4.8 pounds per 1,000 square feet is the labeled lawn broadcast range for LESCO CrossCheck 0.096% Plus Fertilizer, not for every product sold under the CrossCheck name. CrossCheck includes liquid insecticide, dry granular insecticide, sand-based granular insecticide, and an insecticide-fertilizer, so the full product name and formulation must be matched before mixing, spreading, or planning a repeat treatment.

What CrossCheck Insecticide Means

“CrossCheck” is a product family, not one application recipe.

The products use bifenthrin, a broad-spectrum insecticide, but they deliver it in very different forms. A liquid concentrate belongs in a properly prepared spray application; a granular product is distributed with spreading equipment; and a fertilizer-insecticide product adds nutrient application limits to the pest-control decision.

That distinction matters in a lawn, around a home, or near a vegetable garden. A rate printed for a fertilizer bag is not a dilution for a liquid concentrate, and a liquid spray rate is not a spreader setting for granules.

How to Apply CrossCheck Insecticide Correctly

Use this choice map before opening the container or setting up a sprayer or spreader.

Product Category Typical Application Method Where the Exact Rate Comes From
Liquid CrossCheck product Mix and apply as a spray where its label allows The liquid product’s own label
Granular CrossCheck product Spread evenly over the labeled turf or landscape area The granular product’s own label
CrossCheck fertilizer-insecticide Broadcast across labeled lawn areas The fertilizer-insecticide label

Step 1: Match the Full Product Name to Its Formulation

  1. Read the entire front label, including the product name, formulation, active ingredient, and EPA registration information.
  2. Identify whether you have a liquid, a granular insecticide, or a fertilizer-insecticide product.
  3. Confirm that the pest and treatment site are listed on that exact product label.

LESCO CrossCheck Plus is a Tip and Pour liquid listed in a 1 gal./96 oz. package and contains bifenthrin at 7.9%. LESCO CrossCheck EZ is a 25 lb. dry granular product with bifenthrin at 0.2%, while LESCO CrossCheck PL is a 25 lb. sand-based granular product with bifenthrin at 0.2%; both belong in granular application directions rather than liquid-spray directions.

If the bag says LESCO CrossCheck 0.096% Plus Fertilizer, confirm that its EPA registration number is 10404-115. This is a separate fertilizer-insecticide product with its own broadcast rate, yearly maximum, and New York restrictions.

Step 2: Identify the Pest, Damage, and Treatment Site

  1. Check the affected area closely before treating. Look for the insect, fresh feeding damage, active mounds, webbing, or other evidence of current activity.
  2. Decide whether the problem is in turf, around a structure, on an ornamental planting, or another labeled location.

CrossCheck products are marketed for a wide range of pests, including ants, fleas, ticks, mosquitoes, chinch bugs, sod webworms, cutworms, armyworms, crickets, centipedes, millipedes, wasps, termites, and others. Not every formulation is labeled for every pest or every location.

I use a kneeling pad for close checks at the grass line and plant base, because the pest location and damage pattern determine whether a treatment is justified.

For a home vegetable garden, do not assume that “outdoor use” means the product is cleared for edible crops. The exact crop and use site must appear on the product label.

Step 3: Use the Application Method and Rate for That Exact Product

For LESCO CrossCheck 0.096% Plus Fertilizer, broadcast the product with suitable equipment for uniform lawn coverage at 2.4 to 4.8 pounds per 1,000 square feet. This is a lawn broadcast rate for that fertilizer product only; it is not a liquid dilution rate and not a rate for CrossCheck EZ or CrossCheck PL.

Prepare and apply CrossCheck Plus liquid as a spray, not with granular spreading equipment. For CrossCheck EZ and PL, use a spreader to distribute the granular product evenly over the labeled turf or landscape area.

Apply CrossCheck only to the lawn, ornamental planting, structure-adjacent area, or other treatment site allowed for that exact product. A broad lawn treatment should not become a routine response to an insect seen in one small area, especially where pollinators, beneficial insects, waterways, or food crops may be nearby.

Step 4: Record the Application and Finish the Job

  1. Write down the product name, EPA registration number, pest, treatment area, date, and amount used.
  2. Keep the product in its original container so its label and first-aid instructions remain available.
  3. Clean application equipment and follow the exact package directions for access to the treated area before considering the application finished.
  4. Keep the record with your garden or lawn notes so you can track yearly totals and avoid accidental overapplication.

A simple record is especially important when a product combines fertilizer with insecticide. It helps prevent a second application from pushing nutrients or pesticide beyond the product’s limits.

Where CrossCheck Can Be Used and What It Controls

CrossCheck products may be labeled for lawns, ornamental landscapes, outdoor plantscapes, parks, athletic fields, and areas in, around, or under certain residential, institutional, public, commercial, and industrial structures. The product line includes products intended for indoor and outdoor pest management, but each container has its own allowed sites.

For lawn pests, the relevant target may be surface-feeding insects such as chinch bugs, sod webworms, cutworms, armyworms, or ants. For structure-adjacent treatment, the target may instead be crawling insects such as ants, centipedes, millipedes, or certain nuisance pests.

The EPA label for LESCO CrossCheck 0.096% Plus Fertilizer directs deer tick applications in mid- to late spring to target larvae and nymphs in soil and leaf litter. That timing applies to the labeled fertilizer product and tick life stage, not to every CrossCheck use.

Special Restrictions for CrossCheck 0.096% Plus Fertilizer

LESCO CrossCheck 0.096% Plus Fertilizer is limited to 414 pounds per acre yearly, with additional New York water and repeat-application rules.

Track the Annual Maximum

Do not apply more than 414 pounds of LESCO CrossCheck 0.096% Plus Fertilizer per acre per year. Add together every application made during the year, including any treatment done by a household member or lawn-care service.

The 414 pounds per acre per year maximum applies only to LESCO CrossCheck 0.096% Plus Fertilizer.

New York Water and Repeat-Application Rules

In New York State, LESCO CrossCheck 0.096% Plus Fertilizer cannot be applied to grass or turfgrass within 100 feet of a lake, pond, river, stream, wetland, or drainage ditch.

New York users may make one repeat application only when there are signs of renewed insect activity, and not sooner than 2 weeks after the first application. A dated record verifies both the interval and yearly total. These restrictions appear on the product’s EPA-approved label.

Protect People, Pets, Water, and Beneficial Insects

Use the access directions printed on the exact container rather than borrowing a drying time or watering practice from another product.

For skin or clothing exposure to LESCO CrossCheck 0.096% Plus Fertilizer, remove contaminated clothing, rinse the skin immediately with plenty of water for 15–20 minutes, and contact a poison control center or doctor for treatment advice. Retain the original label.

Bifenthrin products are intended to control a broad range of insects. That makes pest identification important: a treatment aimed at an unknown insect can also reduce beneficial insects in the treated area. Limit insecticide use to active, labeled pest problems, and use nonchemical measures where possible, such as removing pest habitat, correcting lawn stress, and avoiding unnecessary whole-yard treatments.

Confirm Control and Avoid Unneeded Repeat Treatments

Inspect the original problem area after treatment rather than judging success by old damage alone. Dead grass blades, old chewed leaves, or abandoned nests may remain visible after the pest activity has stopped.

If activity continues, confirm the following before applying anything else:

  • The insect was identified correctly.
  • The pest is listed on the exact product label.
  • The treatment location is listed.
  • The correct formulation and equipment were used.
  • The application record does not show a restriction on another treatment.

Do not increase the rate to force faster control. A persistent problem may be caused by a different pest, a new infestation, a treatment placed in the wrong location, or conditions that keep favoring the pest. Before deciding on another treatment, review the container name and application record to confirm the formulation, rate, date, and any restrictions.

Frequently Asked Questions

Is CrossCheck insecticide safe for pets?

Pet access depends on the formulation and treated site, so follow the directions on the exact container. Do not rely on a drying time or watering practice from another CrossCheck product. Keep the original container so its access and first-aid instructions remain available.

Will CrossCheck kill spiders in the yard?

CrossCheck may kill spiders only if spiders are specifically listed on the exact product label. Not every formulation is labeled for every pest or every location, so confirm the pest list before treating.

When should LESCO CrossCheck be applied?

Apply it when the listed target pest is active and the exact product label allows treatment at that site. For deer ticks, the LESCO CrossCheck 0.096% Plus Fertilizer label directs treatment in mid- to late spring for larvae and nymphs in soil and leaf litter. Other pests and formulations may require different timing.

How long does CrossCheck insecticide last?

There is no single supported duration for all CrossCheck products. Residual performance depends on whether the product is liquid or granular, where it was applied, the target pest, and weather or irrigation exposure. Before planning another treatment, check for renewed pest activity and use the exact product’s label restrictions rather than setting an arbitrary schedule.